Top Links You Must Click On
Why Averages Are Inadequate, and Percentiles Are Great
Averages are ineffective because they are too simplistic and one-dimensional
By: Michael Kopp
Dec. 12, 2012 07:30 AM
Anyone who ever monitored or analyzed an application uses or has used averages. They are simple to understand and calculate. We tend to ignore just how wrong the picture is that averages paint of the world. To emphasis the point let me give you a real-world example outside of the performance space that I read recently in a newspaper.
The article was explaining that the average salary in a certain region in Europe was 1900 Euro's (to be clear this would be quite good in that region!). However when looking closer they found out that the majority, namely 9 out of 10 people, only earned around 1000 Euros and one would earn 10.000 (I over simplified this of course, but you get the idea). If you do the math you will see that the average of this is indeed 1900, but we can all agree that this does not represent the "average" salary as we would use the word in day to day live. So now let's apply this thinking to application performance.
The Average Response Time
A Bell curve represents the "normal" distribution of response times in which the average and the median are the same. It rarely ever occurs in real applications
In a Bell Curve the average (mean) and median are the same. In other words observed performance would represent the majority (half or more than half) of the transactions.
In reality most applications have few very heavy outliers; a statistician would say that the curve has a long tail. A long tail does not imply many slow transactions, but few that are magnitudes slower than the norm.
This is a typical Response Time Distribution with few but heavy outliers - it has a long tail. The average here is dragged to the right by the long tail.
We recognize that the average no longer represents the bulk of the transactions but can be a lot higher than the median.
You can now argue that this is not a problem as long as the average doesn't look better than the median. I would disagree, but let's look at another real-world scenario experienced by many of our customers:
This is another typical Response Time Distribution. Here we have quite a few very fast transactions that drag the average to the left of the actual median
In this case a considerable percentage of transactions are very, very fast (10-20 percent), while the bulk of transactions are several times slower. The median would still tell us the true story, but the average all of a sudden looks a lot faster than most of our transactions actually are. This is very typical in search engines or when caches are involved - some transactions are very fast, but the bulk are normal. Another reason for this scenario are failed transactions, more specifically transactions that failed fast. Many real-world applications have a failure rate of 1-10 percent (due to user errors or validation errors). These failed transactions are often magnitudes faster than the real ones and consequently distorted an average.
Of course performance analysts are not stupid and regularly try to compensate with higher frequency charts (compensating by looking at smaller aggregates visually) and by taking in minimum and maximum observed response times. However we can often only do this if we know the application very well, those unfamiliar with the application might easily misinterpret the charts. Because of the depth and type of knowledge required for this, it's difficult to communicate your analysis to other people - think how many arguments between IT teams have been caused by this. And that's before we even begin to think about communicating with business stakeholders!
A better metric by far are percentiles, because they allow us to understand the distribution. But before we look at percentiles, let's take a look a key feature in every production monitoring solution: Automatic Baselining and Alerting.
Automatic Baselining and Alerting
The industry has come up with a solution called Automatic Baselining. Baselining calculates out the "normal" performance and only alerts us when an application slows down or produces more errors than usual. Most approaches rely on averages and standard deviations.
Without going into statistical details, this approach again assumes that the response times are distributed over a bell curve:
The Standard Deviation represents 33% of all transactions with the mean as the middle. 2xStandard Deviation represents 66% and thus the majority, everything outside could be considered an outlier. However most real world scenarios are not bell curved...
Typically, transactions that are outside two times standard deviation are treated as slow and captured for analysis. An alert is raised if the average moves significantly. In a bell curve this would account for the slowest 16.5 percent (and you can of course adjust that); however; if the response time distribution does not represent a bell curve, it becomes inaccurate. We either end up with a lot of false positives (transactions that are a lot slower than the average but when looking at the curve lie within the norm) or we miss a lot of problems (false negatives). In addition if the curve is not a bell curve, then the average can differ a lot from the median; applying a standard deviation to such an average can lead to quite a different result than you would expect. To work around this problem these algorithms have many tunable variables and a lot of "hacks" for specific use cases.
Why I Love Percentiles
This chart shows the 50th and 90th percentile along with the average of the same transaction. It shows that the average is influenced far mor heavily by the 90th, thus by outliers and not by the bulk of the transactions
The green line represents the average. As you can see it is very volatile. The other two lines represent the 50th and 90th percentile. As we can see the 50th percentile (or median) is rather stable but has a couple of jumps. These jumps represent real performance degradation for the majority (50%) of the transactions. The 90th percentile (this is the start of the "tail") is a lot more volatile, which means that the outliers slowness depends on data or user behavior. What's important here is that the average is heavily influenced (dragged) by the 90th percentile, the tail, rather than the bulk of the transactions.
If the 50th percentile (median) of a response time is 500ms that means that 50% of my transactions are either as fast or faster than 500ms. If the 90th percentile of the same transaction is at 1000ms it means that 90% are as fast or faster and only 10% are slower. The average in this case could either be lower than 500ms (on a heavy front curve), a lot higher (long tail) or somewhere in between. A percentile gives me a much better sense of my real world performance, because it shows me a slice of my response time curve.
For exactly that reason percentiles are perfect for automatic baselining. If the 50th percentile moves from 500ms to 600ms I know that 50% of my transactions suffered a 20% performance degradation. You need to react to that.
In many cases we see that the 75th or 90th percentile does not change at all in such a scenario. This means the slow transactions didn't get any slower, only the normal ones did. Depending on how long your tail is the average might not have moved at all in such a scenario.!
In other cases we see the 98th percentile degrading from 1s to 1.5 seconds while the 95th is stable at 900ms. This means that your application as a whole is stable, but a few outliers got worse, nothing to worry about immediately. Percentile-based alerts do not suffer from false positives, are a lot less volatile and don't miss any important performance degradations! Consequently a baselining approach that uses percentiles does not require a lot of tuning variables to work effectively.
The screenshot below shows the Median (50th Percentile) for a particular transaction jumping from about 50ms to about 500ms and triggering an alert as it is significantly above the calculated baseline (green line). The chart labeled "Slow Response Time" on the other hand shows the 90th percentile for the same transaction. These "outliers" also show an increase in response time but not significant enough to trigger an alert.
Here we see an automatic baselining dashboard with a violation at the 50th percentile. The violation is quite clear, at the same time the 90th percentile (right upper chart) does not violate. Because the outliers are so much slower than the bulk of the transaction an average would have been influenced by them and would not have have reacted quite as dramatically as the 50th percentile. We might have missed this clear violation!
How Can We Use Percentiles for Tuning?
In throughput oriented applications on the other hand I would want to make the majority of my transactions very fast, while accepting that an optimization makes a few outliers slower. I might therefore make sure that the 75th percentile goes down while trying to keep the 90th percentile stable or not getting a lot worse.
I could not make the same kind of observations with averages, minimum and maximum, but with percentiles they are very easy indeed.
Reader Feedback: Page 1 of 1
Enterprise Open Source Magazine Latest Stories . . .
Subscribe to the World's Most Powerful Newsletters
Subscribe to Our Rss Feeds & Get Your SYS-CON News Live!
SYS-CON Featured Whitepapers
Most Read This Week